Ask a property owner to approve a repair cost on a Meld, then track the owner's response on the Meld.
- Who this is for: Property Manager, Maintenance Coordinator / Dispatcher
- Applies to: 3rd-Party Managed Multi-Family, 3rd-Party Managed Single Family
- Access needed: any staff user who can open the Meld can request, approve or reject for an owner, edit, cancel, and acknowledge an owner approval. No separate role permission is needed.
- Why it matters: the owner signs off on the cost before the work goes ahead, and the request and response are recorded on the Meld.
Before you start:
- The Meld must be open. Request approval does not show on a completed or canceled Meld.
- The Meld needs at least one owner, and at least one owner needs an email address.
- A Meld has one owner approval request at a time. If an Estimate approval is pending on the Meld, finish that first.
- This article covers an approval for a dollar amount from the Meld's Details tab. To send an Estimate for approval, start from the Meld's Estimates tab instead.
How do I request owner approval on a Meld?
To send an owner approval request:
- Click Melds in the left menu, then click the Meld to open it.
- On the Details tab, find the Owner Approval card. It reads "Approval has not been requested". Click Request approval.
- The Owner Approval Request form opens. Its title is "Owner Approval Request:" followed by the Meld's brief description. Check the owners listed under "The following owners will receive this approval request:". Each owner shows with their email address.
- Enter or edit the message. A message is required. The message box can already contain a starting message with variables, and you can edit it. Text in double curly braces, such as {{ owner_first_name }}, is a variable. Property Meld fills in each variable for each owner when the email is sent, so do not change the text inside the braces.
- In the "Owner Approval Dollar Amount:" field, enter the amount you want the owner to approve. The amount cannot be empty or negative. Zero is allowed.
- Click REQUEST APPROVAL. To close the form without sending, click CANCEL.
The variables you can use, and what each one fills in:
- {{ owner_first_name }} and {{ owner_last_name }}: the first and last name of the owner who receives the email.
- {{ management_name }}: your management company name.
- {{ brief_description }}: the Meld's brief description.
- {{ description }}: the Meld's full description.
- {{ estimate }}: the Owner Approval Dollar Amount you enter on this form, written like 1311.28, with no dollar sign and no comma. If the amount is blank, it shows 0.00. It is not the amount of an Estimate.
- {{ addr_lines }}: the street address lines, joined with commas. If the property name is different from the first address line, the name comes first. If the Meld is for a unit, the unit address is used.
- {{ addr_designators }}: the unit details, shortened, such as UNIT 4, FLOOR 2. This is empty for a Meld on the whole property.
- {{ addr_city_state_zip }}: the city, state or province, and ZIP or postal code.
What you'll see: the Owner Approval card shows Status Pending, the amount, "Requested by" with your name and the date, and "Pending response from" with the owners on the Meld. Every active owner on the Meld gets the request by email, whatever their Owner Hub access. Owners with Owner Hub access get a link to log in to Owner Hub. Other owners get a link that opens the request without a login. Owners who can log in to Owner Hub also see the pending request there.
If it didn't work:
- If Request approval is missing, check that the Meld is open, that the Meld has an owner, and that no Estimate approval is pending.
- If the card shows Add an owner email to request instead, the Meld has an owner but no owner has an email address. Add an email address for at least one owner, then request approval.
- If the form shows an error, check that you entered a message and an amount that is zero or more.
How do I check the status of an owner approval request?
To see where an owner approval request stands:
- Open the Meld.
- Click the Details tab.
- Find the Owner Approval card.
What you'll see: the card shows one of these statuses:
- Approval has not been requested: no request is open. This also shows after a request is canceled.
- Pending: the request was sent and no owner has answered yet.
- Approved: an owner approved, or a staff user approved for an owner.
- Rejected: an owner rejected, or a staff user rejected for an owner.
Owners answer by the link in the email or in Owner Hub. An owner can approve or reject the work and add a comment. The first owner to answer completes the request for all owners. "Pending response from" lists every owner on the Meld, so it does not show which owners have answered.
You can see an owner's comment in four places: as Owner Note on the card after the request is Approved or Rejected (it shows None if there is no comment), as Approval note on the View request page, in the Activity feed, and in the Meld's comments.
If it didn't work: if the card still shows Pending, no owner has answered yet. A pending request stays open until an owner answers, a staff user records an answer, the request is canceled, or the Meld is completed, canceled, or merged.
How do I approve or reject for an owner, edit, or cancel a pending request?
While a request is Pending, the Owner Approval card shows View request, Mark Approved, Edit, and Cancel next to Status. View request also shows next to the "Requested by" line.
To approve or reject on behalf of an owner:
- Open the Meld and click the Details tab.
- On the Owner Approval card, click Mark Approved.
- In the Manually Update Request form, select the owner you are answering for. This is required.
- Choose Approve or Reject. Approve is selected by default.
- Add notes if needed, then click Submit. To close the form without saving, click Cancel.
What you'll see: the status changes to Approved or Rejected. Owners are not emailed. Your management team is notified.
To edit a pending request:
- On the Owner Approval card, click Edit.
- The request form opens with your saved message and amount. Change the message, the amount, or the files attached to the request. The owner list cannot be changed here.
- Click REQUEST APPROVAL.
What you'll see: the request stays Pending. Every active owner is emailed the request again, with your changes. The form does not tell you this.
To cancel a pending request:
- On the Owner Approval card, click Cancel.
- In the Restart Approval Process window, which asks "Are you sure you want to restart the owner approval process?", click Yes, restart. To keep the request, click Cancel in that window.
What you'll see: the card returns to "Approval has not been requested", and the request message and date are cleared. The owners are emailed that the approval was canceled.
If it didn't work: Mark Approved, Edit, and Cancel show only while a request is Pending. After an owner or staff user answers, use the options in the next section.
What can I do after an owner responds?
After the request is Approved or Rejected, the Owner Approval card shows these actions next to Status:
- Acknowledge: shows until someone on your team acknowledges the response.
- View request: opens the request, including the owner's approval note.
- Restart approval: asks you to confirm, then opens the request form so you can send a new request.
The card also shows:
- Amount: the dollar amount of the request, or None.
- Owner Note: the comment added with the answer, or None if there is no comment.
- Requested by: who sent the request and the date.
- Approved by or Rejected by: who answered, with the time and date.
What happens after the owner approves?
An owner approval does not change the Meld's status. Approved, rejected, and pending requests do not block assigning, scheduling, completing, closing, or billing the Meld. Use the response to decide the next step, such as assigning or scheduling the work.
If the Meld is completed, canceled, or merged while a request is Pending, the request is cleared and the owners are emailed.
Limitations and things to know
- A Meld has only one owner approval request at a time. Starting a new request while one is pending replaces the old one.
- Requesting approval of an Estimate on the same Meld replaces this request. You cannot start a new request from the Details tab until the Estimate approval is done.
- The first owner to answer completes the request for all owners on the Meld.
- Editing a request emails the owners again. Canceling a request emails the owners that it was canceled. Approving or rejecting for an owner does not email the owners.
- To send an Estimate for owner approval, use the Meld's Estimates tab. This article covers a dollar amount request from the Details tab.
FAQ
Can I change the message the owner receives?
Yes. Edit the message in the Owner Approval Request form before you click REQUEST APPROVAL. Leave text in double curly braces as it is. Property Meld fills in those variables, such as the owner's first name and your company name, when the email is sent. To change a request you already sent, click Edit. The owners are emailed again.
How does the owner get the approval request?
Every active owner on the Meld gets an email. Owners with Owner Hub access get a link to log in to Owner Hub, and can also see the request there. Other owners get a link that opens the request without a login.
Where do I see whether the owner approved?
Open the Meld, click the Details tab, and check the Owner Approval card. It shows Pending, Approved, or Rejected, and the owner's note after a response.
Can I approve or reject for the owner?
Yes. While the request is Pending, click Mark Approved, select the owner, and choose Approve or Reject. The owners are not emailed.
Do all owners need to approve?
No. The first owner to answer completes the request for all owners on the Meld.
Does an owner approval change the Meld?
No. It does not change the Meld's status or block assigning, scheduling, or completing the Meld.
Is this the same as requesting approval for an Estimate?
No. This article covers a dollar amount request from the Meld's Details tab. To request approval of an Estimate, start from the Meld's Estimates tab.